Framing window slopes or when you want to make it beautiful.

As you know, the right choice of slope finishes in our climate is very important.

We do not consider cases where violations were made during the preparation of the window opening and the installation of the window, but even if everything is done correctly in this part. The slope zone is inevitably subjected to regular temperature fluctuations, during ventilation, during battery operation, which causes multiple thermal expansions and contractions of the material. There is a risk of dew point formation and exposure to direct sunlight. In such conditions, even cement-sand plaster often does not withstand and cracks form on it.

Plastering and painting is a traditional method that will need to be updated after 3-5 years.

Plastic slopes are practical and inexpensive, their main disadvantage is that they are plastic, additional linings are required that look cheap and give out plastic. And since you are reading this article, you are probably not considering such an option for framing slopes.

The option of finishing with solid glued wooden panels can decorate the interior, but such a material with a small thickness in the operating conditions described above is prone to cracking. At the same time, in the climate of Italy, where the humidity is higher and there are no such temperature drops, it is very relevant and practical.

The option that our company offers is a combination of beauty and practicality that will not leave anyone indifferent, while it does not have the disadvantages of glued panels representing a single whole. This is a rustic mosaic or 3D fusion-wood panels. The panels look amazing and are absolutely environmentally friendly, as they are made from solid wood. For your attention a large assortment of colors in 2 types of solid wood. They are both practical and live well on slopes. The secret is that the 3D panel consists of separate, rather small-sized plates, which perfectly tolerate climatic changes that cause compression and expansion due to their size. In addition, in our panels, all external and side edges are sanded and coated with moisture-resistant oil, which is also used on cutting boards. Therefore, you can wash them without any problems if necessary. In the event that you manage to damage the oak panel as a result of some kind of mechanical impact or "hydrodynamic shock" :), the damaged segment can be restored right on the spot with the help of a skin and a vial of oil or replaced with a new one of the same.